Marks & Spencer IDECT X2I TWIN Manual page 52

Color profile: Disabled
Composite Default screen
"I cannot make The handset's keypad may be locked (see page 9).
a call." Unlock it before you make a call.
"When I press Make sure the batteries are correctly fitted in your
keys, nothing handset. If the 'battery charge level' symbol on the
happens." display shows 'low', recharge the batteries.
"When I key in a Try moving the handset closer to the base unit.
number, it
Try a different position for the base unit — somewhere
appears on the
higher if possible, or further from other electrical
display, but I
equipment.
can't make an
outside call."
If you have more than one registered handset, make
sure another handset isn't already using the line.
"The phone Check that the base unit's mains power adapter is
does not ring" plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you're using the telephone line cable that
was supplied with your
cables might not work.
Check that the total REN value of all equipment
connected to your telephone line is no more than 4
(see page 3). Disconnect one or more telephones and
see whether that helps.
"There is inter- Move the handset closer to the base unit, or to a
ference and different position.
noise on the
Try moving the base unit so that it's not near other
line."
electrical equipment, such as a television or a
computer.
Help Line:
0845 671 0665 (Local Call rate)
Troubleshooting
telephone. Other telephone line
49