Registering New Handsets; To Register A New Handset - Marks & Spencer IDECT X2I TWIN Manual

Registering new handsets

Registering new handsets
The handset(s) supplied with your
are already registered to it, so you don't need to
register them. But if you've bought extra handsets
separately, you'll need to register them. Each
base unit can be registered to up to four handsets.
To register a Make sure the handset you're registering is in
new handset standby mode.
1
Press the MENU/OK button
è
Display shows
Press the â button THREE times
2
è
Display shows
3 Press the MENU/OK button
è
Display shows
Press the â button TWICE
4
è
Display shows
5
Press the MENU/OK button
è
The display shows
The PIN is 0000 unless you've set a new one
(see page 45 ).
6 Key in the PIN and press the MENU/OK
button
è
The display shows
7 Immediately press the HANDSET LOCATOR
button on the base unit and hold it until you
hear a tone
è
If the base is found and the PIN is correct you
will hear a long confirmation beep. The handset
is automatically given the lowest free handset
number.
56
telephone base unit
telephone
Main Menu >Phonebook
Main Menu >Advanced Set
Advanced Set >Recall Time
Advance Set >Registration
Enter PIN.
Registering