Error Code
X X
(Hex.)
( B9
( D5
( E4
E6
( E8
( EA
F3
( F5
( F6
Error codes in parentheses do not appear in the "MACHINE ERROR X X", since those errors are
displayed as messages described in "[ 1 ] Error messages on the LCD." Those error codes appear in
the communications error list if an equipment error occurs during communications. Refer to Section
1.2, (13).
Light emission intensity error of the LED array. )
The MODEM fails to complete the command transmission sequence. )
Out of recording paper. )
Write error in EEPROM.
Data scanning error during transmission. )
Document removed at phase B.)
Voice message recording or playing-back not started.
EOL not found in page memory transmission mode. )
PC interface error. )
Error factor
VI - 5