The Master Pin - Binatone iDECT V2 System Manual

iDect_V2_IFU_master.book Page 33 Friday, April 4, 2008 4:05 PM

The master PIN

The Master PIN (personal identity number, or security
code) is required when handsets are registered and
deregistered, and when important changes to the settings
are made.
The default setting for the PIN is 0000. To protect your
handset's settings, we recommend that you change it to
a four-digit number you'll easily remember.
1
To change
M
the PIN:
2
d
3
M
u
4
M
5 .
M
.
6
M
7
B
f
Help Line: 0845 345 9677
Press the MENU/OK button
! The display shows Main Menu
D
Press the button THREE times
! The display shows Main Menu
Press the MENU/OK button then the
TWICE
! Display shows Advanced Set
Press the MENU/OK button
Display shows Enter New PIN
!
Key in the new PIN number and press the
MENU/OK button
! Display shows Confirm PIN
Key in the PIN again and press the MENU/OK
button
! You will hear a long confirmation beep and
the display briefly shows New PIN Stored
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
(Local Call rate)
Custom settings
> Phonebook
> Advanced Set
U
button
> Change PIN
33