Display Language - Binatone iDECT V2 System Manual

iDect_V2_IFU_master.book Page 31 Friday, April 4, 2008 4:05 PM
Display
language
1
M
d
2
M
d
3
M
4 :
5
M
6
B
f
Registration
See page 45.
Deregistering
See page 46.
handsets
Recall time
The default value of the recall (also called Flash) time
that is preset in your handset is correct for most UK
lines, but you may need to change it if you are connected
to a PBX. There are three options available:
(85ms),
Help Line: 0845 345 9677
To change the language on the display:
Press the MENU/OK button and the
TWICE
Display shows Main Menu > Personal Set
Press the MENU/OK button ONCE and the
button TWICE
! Display shows Personal Set
Press the MENU/OK button
! Display shows Language >
U D
Use the or button to select your desired
language.
Press the MENU/OK button
! You will hear a confirmation beep
Use the BACK button to exit the menu or press
HANG UP to go to standby mode
Medium (default, 100ms) and
(Local Call rate)
Custom settings
D
button
D
> Language
English
Short
Long (250ms).
31