New Call Tone; To Page All Handsets From The Base Unit - Binatone iDECT V2 System Manual

iDect_V2_IFU_master.book Page 28 Friday, April 4, 2008 4:05 PM
Using a multi-handset system

New Call tone

o
!
To page all
handsets from
the base unit
1
V
V
!
.
!
28
When you are on an intercom call and an
outside call comes in, you'll hear New Call tone
to tell you that someone is calling you.
To answer the outside call and end the intercom
call:
Press the PHONE button briefly
The intercom call will be disconnected and
!
you will be connected to the outside call.
To make all registered handsets ring (this is
useful if you've forgotten where you put a
handset):
Press the HANDSET LOCATOR button on
the base unit
! The handsets ring for up to 30 seconds and
their displays show Paging....
To stop the ringing before 30 seconds:
EITHER press the HANDSET LOCATOR
button again
OR press any button on any handset