Registering New Handsets; To Register A New Handset - Binatone iDECT V2 System Manual

iDect_V2_IFU_master.book Page 44 Friday, April 4, 2008 4:05 PM

Registering new handsets

The handset(s) supplied with your iDECT V2 base unit
are already registered to it, so you don't need to register
them. But if you've bought extra handsets separately,
you'll need to register them. Up to four handsets can be
registered to an iDECT V2 base unit.
To register a
new handset
1
M
2
d
3
M
d
4
M
5
M
6
V
44
Make sure the handset you're registering is in
standby mode.
Press the MENU/OK button
Display shows Main Menu >
!
D
Press the button THREE times
! Display shows Main Menu >
Press the MENU/OK button and the
TWICE
! Display shows Advanced Set
Press the MENU/OK button
! The display shows Enter PIN
The PIN is 0000 unless you've set a new one
(see page 33)
Key in the PIN and press the MENU/OK button
! The display shows Registering...
Immediately press the HANDSET LOCATOR
button on the base unit and hold it until you hear
a repeated beep tone
! If the base is found and the PIN is correct you
will hear a long confirmation beep. The handset
display will show the available handset numbers,
but if you don't select one, it is automatically
given the lowest free handset number.
Phonebook
Advanced Set
D
button
> Registration