Right Handle Switch; Turn Signal Switch; Engine Stop Switch; Horn Switch - HYOSUNG GT 650 EFI Owner's Manual

WARNING
Set the dimmer switch "
vehicle is running in front or against.
④ ④

TURN SIGNAL SWITCH

Using when left, right turn or change
direction.
◉ " �
" Position : Flash the left turn sig-
◉ " �
" Position : Flash the right turn sig-
CAUTION
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the "OFF" position after com-
pleting the turn or lane change.
⑤ ⑤

HORN SWITCH

Press the switch to operate the horn.
" when other
nal lamp.
nal lamp.

RIGHT HANDLE SWITCH

① ①

ENGINE STOP SWITCH

◉ "
" Position : Using when danger-
ous condition of falling down
during drive and others or
engine stop suddenly. The igni-
tion circuit is off. The engine
cannot start or run.
◉ "
" Position : Using when need
operation of engine as drive and
others. The ignition circuit is on
and the engine can run.
Do not operate for the engine stop
switch is in the "
ving at one's pleasure.
② ②
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle-
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
35
�
�
�
�
WARNING
" position while dri-
�