Controls; Ignition Switch; Ignition Key - HYOSUNG GT 650 EFI Owner's Manual

CONTROLS

IGNITION SWITCH

The ignition switch has three positions :
◉ ◉ "OFF" POSITION
All electrical circuits are cut off.
The engine will not start. The key can be
removed.
◉ ◉ "ON" POSITION
The ignition circuit is completed and the
engine can now start. The key cannot be
removed from the ignition switch in this
position.
STEERING
LOCK
KEY
KEY
29
◉ ◉ "LOCK" POSITION
To lock the steering, turn the handlebar
all the way to the left.
Push down the key to the "OFF" position
and turn it to the "LOCK" position after
come up again and remove the key.
All electrical circuits are disconnected.
WARNING
Turning the ignition switch to the "OFF"
or "LOCK" position while the motorcy-
cle is moving can be hazardous. Moving
the motorcycle while the steering is
locked can be hazardous. You could
lose your balance and fall, or you could
drop the motorcycle.
Stop the motorcycle and place it on the
side stand if equipped before locking
the steering. Never attempt to move the
motorcycle when the steering is locked.

IGNITION KEY

a pair of identical ignition keys. Keep the
spare key in a safe place.
Your motorcycle ignition keys are
stamped with an identifying number. This
number is used when making replacement
keys. Please write your key number in the
box provided for your future reference.
Key number :
come equipped with