Brakes; Brake Fluid - HYOSUNG GT 650 EFI Owner's Manual

Hide thumbs Also See for GT 650 EFI:
Table of Contents

Advertisement

2. After thoroughly washing the chain and
allowing it to dry, oil the links with a
Hyosung chain lube or an equivalent.
CAUTION
Some drive chain lubricants contain sol-
vents and additives which could dam-
age the "X-O rings" in your chain.
Use Hyosung chain lube or an equiva-
lent that is specifically intended for use
with "X-O rings" chains.
disk brakes.
Properly operating the brake systems are
vital to safe riding. Be sure to perform the
brake inspection requirements as sched-
ules.
The brakes should be inspected at period-
ic inspection by your authorized Hyosung
dealer.
◉ ◉ BRAKE FLUID
Be sure to check the brake fluid level in
the master cylinder. If the level was found
to be lower than the lower mark while
holding the motorcycle upright, replenish
with the proper brake fluid that meets
Hyosung's requirements.
As the brake pads wear, the fluid level will
drop to compensate for the new position of
barke pads.
Replenishing the master cylinder to con-
sidered normal periodic maintenance.
68

BRAKES

utilize front and rear

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents