Instrument Panel; High Beam Indicator Lamp; Neutral Indicator Lamp; Coolant Temperature Meter - HYOSUNG GT 650 EFI Owner's Manual

INSTRUMENT PANEL

�
�
CAUTION
When the ignition switch is turned to the
"ON" position, the display of speedome-
ter will come on.
CAUTION
To adjust the light of speedometer dis-
play, push the switch ⑨ ⑨
mode) for 0.6 ~ 1 seconds while you
want to change.
[Light of speedometer display]
①
TACHOMETER
The tachometer indicates the engine
speed in revolutions per minutes (rpm).
② ②
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated
either to the right or to the left, the indicator
will flash at the same time.
� �
� �
�
� �
(in the normal
100%
↓ ↓
75%
↓ ↓
50%
↓ ↓
25%
③ ③

HIGH BEAM INDICATOR LAMP

The high beam indicator lamp will come
on when the head lamp high beam is
turned on.
�
④ ④

NEUTRAL INDICATOR LAMP

�
The neutral indicator lamp will come on
�
when the transmission is in neutral.
�
The lamp will go out when you shift into
any gear other than neutral.
⑤ ⑤

COOLANT TEMPERATURE METER

are LCD(Liquid Crystal Display) type, it
indicates the coolant temperature.
The "H"(Hot) mark indicates the coolant
temperature is hot.
When the coolant temperature is higher
than 125 ℃ , the red lamp of "H"(Hot) mark
comes on.
The "C"(Cool) mark indicates the coolant
temperature is cool.
Running the engine with high engine
coolant temperature can cause serious
engine damage.
If the engine coolant temperature meter
comes on the red lamp of "H" mark,
stop the engine to let it cool.
30
's the speedometer
CAUTION