Engine Coolant Solution; Required Amount Of Water / Coolant; Coolant Reservoir Tank; Water For Mixing - HYOSUNG GT 650 EFI Owner's Manual

ENGINE COOLANT SOLUTION

Use an engine coolant that is compatible
with aluminum radiator, mixed with distilled
water only at a 50 : 50 mixture ratio for
engine coolant solution.
An engine coolant mixture other than
50 : 50 can affect cooling efficiency or rust
inhibiting peformance.
WARNING
Engine coolant is harmful or fatal if
swallowed or inhaled.
Do not drink anti-freeze or coolant
solution. If swallowed, do induce
vomiting. Immediately contact a poi-
son control center or a physician.
Avoid inhaling mist or hot vapors ; if
inhaled, remove to fresh air. If coolant
gets in eyes, flush eyes with water
and seek medical attention. Wash
thoroughly after handling. Solution
can be poisonous to animals.
Keep out of the reach of children and
animals.
CAUTION
Spilled engine coolant can damage
painted surfaces.
Do not spill any fluid when filling the
radiator. Wipe spilled engine coolant
up immediately.
◉ ◉ WATER FOR MIXING
Use distilled water only.
Water other than distilled water can cor-
rode and clog the aluminum radiator.
◉ ◉ ENGINE COOLANT
The engine coolant performs as rust
inhibitor and water pump lubricant as well
as anti-freeze.
Therefore the engine coolant should be
used at all times even though the atmos-
pheric temperature in your area does not
go down to freezing point.

Required amount of water / coolant

Solution capacity (total)
50%
Engine coolant
N O T E
This 50 % % mixture will protect the cooling
system from freezing at temperatures
℃ ℃
above -31 .
If the motorcycle is to be exposed to
temperature below -31
ratio should be increased up to 55 % %
℃ ℃
) or 60 % % (-55
(-40
The mixing ratio should not exceed
60 % % .
◉ ◉ COOLANT RESERVOIR TANK
☞ Refer to 47 page.
16
1.6 ℓ
0.8 ℓ
Water
0.8 ℓ
℃ ℃
, , this mixing
℃ ℃
).