Gateway C-140S Manual page 8

Replacing a Memory Module
10 Pull the memory module out of the slot.
Technical Support
See the label on the bottom of the notebook for Customer Care Information. See
your Reference Guide for important safety, regulatory, and legal information.
11 Hold the new or replacement module at a 30-degree angle and
insert it into the empty memory slot. This module is keyed so it
can only be inserted in one direction. If the module does not fit,
make sure that the notch in the module lines up with the tab in
the memory bay.
Use only memory modules designed for your Gateway convertible
notebook.
12 Gently push the module down until it clicks in place.
13 Replace the memory bay cover, then tighten the cover screws.
14 Insert the battery(ies), then turn your convertible notebook over.
15 Connect to the optional port replicator.
-OR-
Connect the power adapter, modem cable, and network cable.
16 Reconnect all peripheral devices and replace any PC and memory
cards.
17 Turn on your convertible notebook.
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
or registered trademarks of Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
2