Rear Fan - IBM 6219 - IntelliStation M - Pro Hardware Maintenance Manual

6. Gently move the power supply away from the chassis and lift it out of the

Rear fan

Before you begin:
v Read "Important safety information" on page iii.
v Review the information in "System reliability considerations" on page 35.
To remove the rear fan, complete the following steps:
68
IBM IntelliStation M Pro Type 6219: Hardware Maintenance Manual
server.
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the cover. See "Removing the side cover" on page 41.
4. Remove the support-bracket assembly. See "Removing the side cover" on
page 41.
5. Remove the fan cable from the system board.
6. Use side cutters to sever the four rubber extensions on the outside of the
server.
7. Gently pry the fan away from the server and lift it up and out.
8. To install the new fan assembly, place the fan in position at the rear of the
server.
9. Guide the rubber extensions through the apertures.