FRU information (service only)
The field replaceable unit (FRU) procedures are intended for trained servicers who
are familiar with IBM products.
Removing the front bezel
The following illustration shows how to remove the bezel from the server.
Note: The illustrations in this document might differ slightly from your hardware.
Do the following to remove the bezel:
1. Review the information in "System reliability considerations" on page 35.
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the side cover (see "Removing the side cover" on page 41).
4. Press the bezel-release latch at the top of the server to disconnect the top of
© Copyright IBM Corp. 2002
then all external cables.
the bezel from the server.
61