Configuring Ilo 2 Access; Services Options - HP AB500A - Integrated Lights-Out Advanced User Manual

After iLO 2 is correctly configured, revoking this privilege from all groups prevents reconfiguration.
Users with the Administer Group Accounts privilege can enable or disable this privilege. iLO 2 can
also be reconfigured if iLO 2 RBSU is enabled.
Click Save Group Information to save updated information, or click Cancel to discard changes and return
to the Group Administration page.

Configuring iLO 2 access

iLO 2 allows you to configure which services are enabled on iLO 2 and user access to iLO 2. To
configure iLO 2 services options (on page 33), click Administration>Access. The Services page (tab)
appears. To configure iLO 2 access options (on page 39), click Administration>Access>Options (tab).
You must have the Configure iLO 2 Settings privilege to modify iLO 2 services and access options.

Services options

The Services tab enables you to select which services you want to enable on iLO 2, including SSH, SSL,
Remote Console, telnet, and Terminal Services. The Services tab also enables you to set the ports for each
selected option. Settings on the Services page apply to all iLO 2 users. You must have the Configure iLO
2 Settings privilege to modify settings on this page.
To access Services, click Administration>Access>Services. Click Apply to save updated information. You
must restart iLO 2 before any changes take effect. If any changes have been made to enable or disable
Lights-Out functionality, clicking Apply terminates your browser connection and restarts iLO 2. You must
wait at least 30 seconds before attempting to reestablish a connection.
The Services tab includes the following settings:
Parameter
Secure Shell (SSH)
Access
Default value Description
Enabled This setting enables you to specify whether the SSH feature
on the iLO 2 is enabled or disabled.
Configuring iLO 2 33