User Restrictions - HP AB500A - Integrated Lights-Out Advanced User Manual

host. Events, such as unexpected power loss or flashing LOM firmware, can cause the LOM device clock
to not be set. Also, the host time must be correct for the LOM device to preserve time across firmware
flashes.
Role address restrictions
Role address restrictions are enforced by the LOM firmware, based on the client's IP network address.
When the address restrictions are met for a role, the rights granted by the role apply.
Address restrictions can be difficult to manage if access is attempted across firewalls or through network
proxies. Either of these mechanisms can change the apparent network address of the client, causing the
address restrictions to be enforced in an unexpected manner.

User restrictions

You can restrict access using address or time restrictions.
User address restrictions
Administrators can place network address restrictions on a directory user account, and these restrictions
are enforced by the directory server. Refer to the directory service documentation for details on the
enforcement of address restrictions on LDAP clients, such as a user logging in to a LOM device.
Network address restrictions placed on the user in the directory might not be enforced in the expected
manner if the directory user logs in through a proxy server. When a user logs in to a LOM device as a
directory user, the LOM device attempts authentication to the directory as that user, which means that
address restrictions placed on the user account apply when accessing the LOM device. However,
because the user is proxied at the LOM device, the network address of the authentication attempt is that
of the LOM device, not that of the client workstation.
IP address range restrictions
IP address range restrictions enable the administrator to specify network addresses that are granted or
denied access by the restriction. The address range is typically specified in a low-to-high range format. An
address range can be specified to grant or deny access to a single address. Addresses that fall within the
low to high IP address range meet the IP address restriction.
IP address and subnet mask restrictions
IP address and subnet mask restrictions enable the administrator to specify a range of addresses that are
granted or denied access by the restriction. This format has similar capabilities as an IP address range but
might be more native to your networking environment. An IP address and subnet mask range is typically
specified using a subnet address and address bit mask that identifies addresses that are on the same
logical network.
In binary math, if the bits of a client machine address, added with the bits of the subnet mask, match the
restriction subnet address, then the client machine meets the restriction.
DNS-based restrictions
DNS-based restrictions use the network naming service to examine the logical name of the client machine
by looking up machine names assigned to the client IP addresses. DNS restrictions require a functional
Directory-enabled remote management 169