HP AB500A - Integrated Lights-Out Advanced User Manual page 34

Parameter Default value
Secure shell (SSH) 22
Port
Telnet Access Disabled
Remote 23
Console/Telnet Port
Web Server Non-SSL 80
Port
Web Server SSL Port 443
Terminal Services Disabled
Passthrough
Terminal Services Port 3389
Virtual Media Port 17988
Shared Remote 9300
Console Port
Description
This setting enables you to configure the iLO 2 SSH port to
be used for SSH communications.
This setting enables you to connect a telnet client to the
Remote Console/Telnet port, providing access to the iLO 2
CLP. The following settings are valid:
•
Enabled—iLO 2 enables telnet clients to connect to the
Remote Console/Telnet port. Network port scanners can
detect that iLO 2 is listening on this port. Unencrypted
communication is allowed between the iLO 2 CLP and
telnet clients.
•
Disabled—iLO 2 does not allow telnet clients to connect
to the Remote Console/Telnet port. Network port
scanners will not normally detect if this port is open on
iLO 2. iLO 2 listens on this port for a few seconds when
the Remote Console is opened, but telnet connections are
not accepted.
Communication between the iLO 2 and Remote Console is
always encrypted.
This setting enables you to specify which port the iLO 2
Remote Console uses for remote console communications.
This setting enables you to specify which port the embedded
web server in iLO 2 uses for unencrypted communications.
This setting enables you to specify which port the embedded
web server in iLO 2 uses for encrypted communications.
This setting enables you to control the ability to support a
connection through iLO 2 between a Microsoft® Terminal
Services client and Terminal Services server running on the
host. The following settings are valid:
•
Automatic—When remote console is started, the Terminal
Services client is launched.
•
Enabled—The pass-through feature is enabled and can
connect the Terminal Services client directly to the iLO 2
without logging-into the iLO 2.
•
Disabled—The pass-through feature is off.
This setting enables you to specify the Terminal Services Port
that the iLO 2 uses for encrypted communications with
Terminal Services Pass-through software on the server. If the
Terminal Services port is configured to anything other than
the default, you must manually change the port number.
This setting enables you to specify the port for virtual media
support in iLO 2 communications.
This setting enables you to specify the Shared Remote
Console Port. The Shared Remote Console Port is opened on
the client to allow additional users to connect to remote
console in a peer-to-peer fashion. This port is only open when
Shared Remote Console is in use.
Configuring iLO 2 34