HP AB500A - Integrated Lights-Out Advanced User Manual page 191

Event log display
Virtual Floppy in use by: User
Remote Console login: User
Remote Console Closed
Failed Console login - IP Address: IP address
Added User: User
User Deleted by: User
Modified User: User
Browser login: User
Browser logout: User
Failed Browser login – IP Address: IP address
Remote Console login: User
Remote Console Closed
Failed Console login – IP Address: IP address
Added User: User
User Deleted by: User
Event Log Cleared: User
Power Cycle (Reset): User
Virtual Power Event: User
Security Override Switch Setting is On
Security Override Switch Setting
Changed to Off
On-board clock set; was previously
[NOT SET]"
Logs full SNMP trap alert failed for: IP address
Security disabled SNMP trap alert failed for: IP
address
Security enabled SNMP trap alert failed for: IP
address
Event log explanation
Displays when a user begins using a Virtual Floppy.
Displays when a user logs on a Remote Console
session.
Displays when a Remote Console session is closed.
Displays a failed console login and IP address.
Displays when a local user is added.
Displays when a local user is deleted.
Displays when a local user is modified.
Displays when a valid user logs on to iLO 2 using
an Internet browser.
Displays when a valid user logs off iLO 2 using an
Internet browser.
Displays when a browser login attempt fails.
Displays when an authorized user logs on using the
Remote Console port.
Displays when an authorized Remote Console user
is logged out or when the Remote Console port is
closed following a failed login attempt.
Displays when an unauthorized user has
failed three login attempts using the
Remote Console port.
Displays when a new entry is made to the
authorized user list.
Displays when an entry is removed from the
authorized user list. The User section displays the
user who requested the removal.
Displays when the user clears the Event Log.
Displays when the power has been reset.
Displays when the Virtual Power Button is used.
Displays when the system is booted with the
Security Override Switch set to On.
Displays when the system is booted with the
Security Override Switch changed from On to Off.
Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there was
not a time setting previously.
Displays when the logs are full and the SNMP trap
alert failed for a specified IP address.
Displays when the security has been disabled and
the SNMP trap alert failed for a specified IP
address.
Displays when the security has been enabled and
the SNMP trap alert failed for a specified IP
address.
Troubleshooting iLO 2 191