Uniden UM415BK Owner's Manual page 14

You cannot transmit while in scan mode.
Using the radio in scan mode
You must have two or more channels in memory to start a scan.

To save a channel into memory, select the channel, then press and hold

seconds. Memory will show on the display.

To remove a channel from memory, set the radio to that channel, then press and hold
for two seconds. Memory will no longer show on the display.

To activate scan mode, press and hold
MEM
to the previous mode.

When the radio automatically stops on a channel, press
and resume scanning.

To end the scan, press the microphone's
radio remains on the last scanned channel.

If you activate Weather Alert Watch while operating in scan mode, the radio checks the most
Scan mode with Weather Alert Watch
recently-used weather channel
every seven seconds, then
continues scanning the next
channel in memory.
To turn Weather Alert Watch on
or off, press and hold
while the radio is idle. Select Setup and then WX Alert
Mode. Use
Alert Mode setting ON or Off. Scan mode with Triple and
CHANNEL UP
If you activate Triple Watch while
Dual Watch
operating in scan mode, the radio
checks channels 16 and 9 every
two seconds, then goes on to scan
the next channel; with Dual Watch
turned on, the radio only checks
channel 16.
Press and hold
radio or the microphone) for two seconds to turn Triple/Dual Watch on or off. (To change
16/9-TRI
between Triple or Dual Watch, see page 18.)
Press and hold the
mode.
Scan mode with both Weather
You can activate Weather Alert
Alert and Triple/Dual Watch
Watch and Triple/Dual Watch at
the same time. The radio
performs both checks at their
scheduled time.
1 English
CALL-MENU
and
CHANNEL DOWN
08 08
(on the
key to turn off Scan mode and set the radio to Triple/Dual Watch
CLR-SCAN
Triple Watch: Triple Watch:
Every 2 seconds, Every 2 seconds,
the radio checks the radio checks
channels 9 & 16 channels 9 & 16
then goes on to then goes on to
the next channel. the next channel.
. Press and hold
CLR-SCAN
PUSH TO TALK, CALL-MEM,
to choose WX
Memory Channel Scan Memory Channel Scan
10 10 11 11 12 12 13 13
09 16 09 16
Memory Channel Scan Memory Channel Scan
08 08 10 10 11 11 12 12
09 16 09 16
WX-MEM
CLR-SCAN
to leave that channel
CHANNEL UP
or
WX-MEM
14 14 15 15 17 17 20 20
Triple Watch : Triple Watch :
seconds, the radio checks seconds, the radio checks
channels 9 & 16 then goes on channels 9 & 16 then goes on
to the next channel. to the next channel.
13 13 14 14 15 15 17 17
WX Alert : WX Alert :
Every 7 Every 7
seconds, the radio seconds, the radio
checks the last-used checks the last-used
weather channel, weather channel,
then scans the next then scans the next
channel. channel.
for two
WX-
again to return
buttons. The
24 24 25 25
Every 2 Every 2
20 20 24 24 25 25
wx wx