Table of Contents
Advertisement
About the Gateway Manager
5
Accept the terms of the license agreement, and then click Next.
6
In the Destination Folder panel, do one of the following:
To install pcAnywhere Gateway in the default program directory, click
Next.
To change the installation directory, click Change.
In the Change Current Destination Folder panel, browse to the folder
location in which you want to install Symantec pcAnywhere Gateway, and
then click OK. Then, in the Destination Folder panel, click Next.
7
In the Gateway Security panel, do one of the following:
To assign a password for gateway sessions, under Require a password to
connect to the Gateway, in the Password and Confirm Password boxes,
type the password, and then click Next.
If you do not want to assign a password, uncheck Require a password to
connect to the Gateway, and then click Next.
You can assign a user password after installation.
8
The Symantec pcAnywhere Gateway icon is placed on the desktop by default.
If you do not want this shortcut on your desktop, in the Ready to Install the
Program Panel, under Desktop shortcut, uncheck Symantec pcAnywhere
Gateway.
9
The Symantec pcAnywhere Gateway service starts automatically by default.
If you do not want the Symantec pcAnywhere Gateway service to start
automatically, uncheck Start Symantec pcAnywhere Gateway Service.
10
When you are ready to start the installation, click Install.
11
Click Finish when the installation is complete.
When you start the Symantec pcAnywhere Gateway service, it automatically
discovers the pcAnywhere hosts that are running on the local subnet. The right
pane of the Gateway Manager window shows all of the active sessions that are
running through the gateway computer. If there are no active sessions, the right
pane is empty.
Figure 14-2
shows the Gateway Manager window.
Managing Symantec pcAnywhere Gateway
About the Gateway Manager
311
Advertisement
Table of Contents
