Table of Contents
Advertisement
64
Installing Symantec pcAnywhere
Post-installation tasks
Post-installation tasks
Starting Symantec pcAnywhere
To run the setup program manually
1
Insert the Symantec pcAnywhere CD into the CD-ROM drive.
2
On the Windows taskbar, click Start > Run.
3
Type <CD-ROM drive letter>:\setup.exe
For example:
D:\setup.exe
4
Click OK.
5
Install pcAnywhere.
In Windows Vista/2008 Server, the operating system might prompt you to
approve this action. You do not receive this prompt if you are logged on to
the built-in administrator account.
Note: If you want to install pcAnywhere on a mapped drive on Vista/2008
Server, you should map the drive using an elevated command prompt.
After you install Symantec pcAnywhere, you can perform the following
post-installation tasks:
Starting Symantec pcAnywhere
Modifying installation settings
Updating Symantec pcAnywhere
Uninstalling Symantec pcAnywhere
Symantec pcAnywhere is installed in the Windows Program Files folder by default.
During installation, pcAnywhere optionally lets you place a program icon on the
Windows desktop from which you can open the program. You can also open
pcAnywhere from the Windows Start menu.
To start Symantec pcAnywhere
Do one of the following:
On the Windows XP/2003/2000 desktop, double-click Symantec
pcAnywhere.
Advertisement
Table of Contents
