Symantec PCANYWHERE - V12.5 User Manual page 147

9 To protect the host by serializing connections, check Assign serial ID to limit
host connections, and then type the serial number that you want to use.
This embeds a serial ID in the host configuration. Serial IDs must be a numeric
value between 0 and 4,294,967,296.
Remote users must have the same serial ID embedded in their remote
configuration for the host to accept the connection.
For more information, see the Symantec pcAnywhere Administrator's Guide.
10 If you want the host to dock to a computer that is running Symantec
pcAnywhere Access Server, check Dock to a pcAnywhere Access Server.
If you select this option, the wizard will later prompt you for the information
that is needed to connect to the access server.
11 Click Next.
12
If you use pcAnywhere authentication, type the logon credentials that you
want to use to validate connections to the host computer, and then click Next.
This panel only appears if you select pcAnywhere authentication.
13 Check I have a host license for each target computer to confirm that you
have a host license for the host computer.
You must confirm that you have a host license for the target computer to
continue. If you do not have a host license, click the Symantec Store link to
purchase one.
14 To save these settings as an executable file that can be used for later
deployment, select one of the following:
Send Email
Save to Disk
15 Click Finish to save the configuration and start the deployment.
16
When prompted, type your caller logon credentials.
Controlling another computer remotely
Connecting to a computer that does not have a host running
Opens the default email program on your computer.
To use this option, your email program must support the
Messaging Application Programming Interface (MAPI).
Lets you select a file name and location in which to create
and save the host configuration as a self-extracting
package.
147