Table of Contents
Advertisement
Ways to connect to a host through Web Remote
Connecting to a host in the host list
3
In the Status port box, type the port number that the host computer is using.
4
Click OK.
To reset port settings
1
In the Symantec pcAnywhere Web Remote window, click Advanced.
2
Click Reset Default.
This resets the Data port to 5631 and the Status port to 5632.
3
Click OK.
You can connect to a host computer in one of the following ways:
Select a host from the host list.
Manually enter the IP address or computer name of the host.
The Web Remote automatically searches your local subnet for TCP/IP host
computers that are waiting for a connection. The Web Remote searches for hosts
that are waiting on the default data port (5631).
You can also search other subnets for available hosts.
To connect to a host in the host list
1
In the Symantec pcAnywhere Web Remote window, click Advanced.
2
In the Advanced Options window, under Encryption, configure your encryption
settings.
3
Click OK.
4
In the Symantec pcAnywhere Web Remote window, click Configure TCP/IP.
5
In the Configure TCP/IP dialog box, in the Enter subnet to search box, type
the subnet address that you want to search.
To search a subnet, type the first three octets of the subnet. Then, type either
.0 or .255 as the fourth octet. For example:
172.16.0.255 or 172.16.0.0
6
Click OK.
7
Double-click the host computer to which you want to connect.
8
In the Authentication dialog box, next to Login Name, type your logon name.
Connecting from a Web browser
Ways to connect to a host through Web Remote
269
Advertisement
Table of Contents
