Table of Contents
Advertisement
Access method switches
To run the command prompt as an administrator
1
On the taskbar, click Start > All Programs > Accessories, right-click
Command Prompt and click Run as administrator.
2
In the User Account Control dialog box, type the administrator credentials.
3
Click OK.
Table 6-2
lists the access method switches that you can use in any operation. Not
all access methods are relevant to the Win32 version, OmniFS32.exe.
Access method switches
Table 6-2
Switch
Description
/ad=image file
Mounts the specified vmdk, pqi, v2i, or iv2i image file ("add" the image
name
as a disk). Once added, a vmdk disk can be used in all normal
operations, but the pqi, v2i, and iv2i disks are read-only.
/addDisk=image
file name
/cp=codepage
Handles the code page in the same way as the current OEM page. The
code page is specified as a number.
/diskfs
Specifies that the preferred file system access is through the
application file system code.
/diskvol
Specifies that the preferred volume access is through the application
volume code.
/dl=n
Specifies the number of hard drives present.
/ffi
Prefers use of Direct IDE Access (DOS only).
/ffs
Prefers use of Direct ASPI/SCSI Access.
/ffx
Prefers use of Extended Int13h.
/fna
Disables asynchronous I/O.
/fni
Disables Direct IDE Access support (DOS only).
/fns
Disables Direct ASPI/SCSI Access support.
/fnx
Disables Extended Int13h support.
/force1394
Forces the IEEE1394 device (Firewire) to start (DOS only).
Manipulating files and directories using OmniFS
81
Using OmniFS
Advertisement
Table of Contents
