Symantec Ghostcast Errors - Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual

Symantec GhostCast errors

If you are having problems using Symantec Ghost or the Symantec GhostCast
Server ensure that you have the latest drivers for your network card installed.
The manufacturer of your network card or computer should have the latest drivers
available on its Web site.
Table E-3 lists specific answers to GhostCasting errors. Use the solution most
closely related to the problem that you are experiencing.
Symantec GhostCast errors
Table E-3
Problem
When I launch Symantec
Ghost, I am unable to select
GhostCasting.
Solution
Symantec Ghost uses a packet driver or NDIS2 drivers to
perform GhostCasting. If Symantec Ghost does not detect
a packet driver in memory or if the packet driver is
inappropriate for your network card, the GhostCasting
option is not available. You must have a boot disk that loads
the appropriate packet driver or NDIS2 drivers for your
network card.
Use the Ghost Boot Wizard to create a packet-driver boot
disk.
Troubleshooting
Symantec GhostCast errors
175