Point-To-Point Bridge Configuration; Workgroup Bridge Network - Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Hardware Installation Manual

Network Examples with Autonomous Access Point/Bridges

Point-to-Point Bridge Configuration

In a point-to-point bridge configuration, two bridges interconnect two LAN networks using a wireless
communication link (see
root bridge and the other bridge is classified as a non-root bridge.
Figure 1-8

Workgroup Bridge Network

The access point supports a workgroup bridge role to interconnect remote Ethernet workstations to the
main LAN. The workgroup bridge can communicate with an access point (see
bridge (see
Figure 1-9
Figure 1-10
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
1-12
Figure 1-8). The bridge connected to the main LAN network is classified as a
Point-to-Point Bridge Configuration
Root bridge
Figure 1-10).
Workgroup Bridge Communicating with an Access Point
Access point
Workgroup Bridge Communicating with a Bridge
Bridge
Non-root bridge
Workgroup bridge
Workgroup
bridge
Chapter 1 Overview
Figure 1-9) or with a
OL-5048-06