Point-To-Point Bridge Configuration; Workgroup Bridge Network - Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Hardware Installation Manual

Chapter 1 Overview

Point-to-Point Bridge Configuration

In a point-to-point bridge configuration, two bridges interconnect two LAN networks using a wireless
communication link (see
root bridge and the other bridge is classified as a non-root bridge.
Figure 1-6

Workgroup Bridge Network

The access point supports a workgroup bridge role to interconnect remote Ethernet workstations to the
main LAN. The workgroup bridge can communicate with an access point (see
bridge (see
Figure 1-7
Figure 1-8
OL-8370-04
Figure 1-6). The bridge connected to the main LAN network is classified as a
Point-to-Point Bridge Configuration
Root bridge
Figure 1-8).
Workgroup Bridge Communicating with an Access Point
Access point
Workgroup Bridge Communicating with a Bridge
Bridge
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Network Examples with Autonomous Access Points
Non-root bridge
Workgroup bridge
Workgroup
bridge
Figure 1-7) or with a
1-11