Chapter 1
Overview
Network Examples with Lightweight Access Points
The lightweight access points support Layer 3 network operation. Lightweight access points and
controllers in Layer 3 configurations use IP addresses and UDP packets, which can be routed through
large networks. Layer 3 operation is scalable and recommended by Cisco.
This section illustrates a typical wireless network configuration containing lightweight access points and
a Cisco Wireless LAN Controller (see
Figure 1-11
OL-5048-06
Figure
Typical Lightweight Access Point Network Configuration Example
LWAPP
LWAPP
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
Network Examples with Lightweight Access Points
1-11).
1-13