Integrated Antenna; External Antenna - Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Hardware Installation Manual

Wireless outdoor access point/bridge
Hide thumbs Also See for AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge:
Table of Contents

Advertisement

Chapter 1
Overview
The power injector and the power module must not be placed in an outdoor unprotected environment. The
Note
power module must not be placed in a building's environmental air space, such as above a suspended ceiling.

Integrated Antenna

The access point/bridge is available with an integrated 13-dBi patch array antenna. The antenna is
covered with a radome to protect it from environmental elements. The integrated antenna is vertically
polarized.
Note
Some international regulatory regions may restrict the integrated antenna access point/bridge
configuration.

External Antenna

The access point/bridge is available in an external antenna configuration (see
Cisco Aironet 2.4-GHz antennas. Two reverse-TNC type RF connectors are provided on the end of the
unit to support single or diversity antenna configurations. The antennas connect to the access
point/bridge antenna connectors using a coax cable.
the access point/bridge.
Table 1-1
Antenna
AIR-ANT2506
AIR-ANT3549
AIR-ANT2410Y-R
AIR-ANT24120
AIR-ANT1949
AIR-ANT2414S-R
AIR-ANT3338
1. Not supported by the lightweight access point (AIR-LAP1310G)
To meet regulatory restrictions, the external antenna access point/bridge unit and the external antenna
Note
must be professionally installed. The network administrator or other IT professional responsible for
installing and configuring the unit is a suitable professional installer. Following installation, access to the
unit should be password protected by the network administrator to maintain regulatory compliance.
OL-5048-06
Cisco Aironet Power Injector LR2T—optional transportation version
12- to 40-VDC input power
Supported External Antennas
1
1
1
1
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
Table 1-1
Description
5.2-dBi omnidirectional antenna with vertical polarization
9-dBi patch wall mount antenna
10-dBi yagi antenna
12-dBi omnidirectional antenna with vertical polarization
13.5-dBi yagi antenna
14-dBi sector antenna with vertical polarization
21-dBi dish antenna
Figure
1-1) for use with
lists the external antennas supported by
Key Features
1-5

Advertisement

Table of Contents
loading

Table of Contents