Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Hardware Installation Manual page 5

Troubleshooting Autonomous Access Points and Bridges
4
C H A P T E R
Troubleshooting Lightweight Access Points
5
C H A P T E R
OL-5048-06
Checking the LEDs on an Autonomous Access Point/Bridge
Normal Mode LED Indications for an Autonomous Access Point/Bridge
Power Injector
4-5
Checking Power
4-6
Checking Basic Configuration Settings
Default IP Address Behavior
Default SSID and Radio Behavior
Enabling the Radio Interface
SSID
4-7
Security Settings
4-8
Antenna Alignment
4-8
Running the Carrier Busy Test
Running the Ping or Link Test
Resetting the Autonomous Access Point/Bridge to the Default Configuration
Using the Web-Browser Interface
Using the CLI on an Autonomous Access Point/Bridge
Reloading the Access Point/Bridge Image
Web-Browser Interface
Browser HTTP Interface
Browser TFTP Interface
Obtaining the Autonomous Access Point/Bridge Image File
Obtaining the TFTP Server Software
Checking the LEDs on Lightweight Access Points
LED Indications
5-3
Power Injector
5-4
Checking Power
5-5
Using DHCP Option 43
5-5
Manually Configuring Controller Information Using the Access Point CLI
Connecting to the Console Serial Port
Configuring Controller Information
Clearing Manually Entered Controller Information
Manually Resetting the Access Point to Defaults
Returning the Access Point to Autonomous Mode
Using a Controller to Return the Access Point to Autonomous Mode
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
4-6
4-6
4-6
4-7
4-8
4-9
4-10
4-11
4-11
4-11
4-12
4-14
5-1
5-2
5-6
5-7
5-7
5-8
5-8
4-1
4-2
4-2
4-10
4-10
4-13
5-6
5-8
Contents
v