Troubleshooting Autonomous Access Points and
Bridges
This chapter provides troubleshooting procedures for basic problems with the autonomous access
point/bridge (model: AIR-BR1310G). For the most up-to-date, detailed troubleshooting information,
refer to the Cisco Technical Support and Documentation website at the following URL:
http://www.cisco.com/en/US/products/hw/wireless/tsd_products_support_category_home.html
Sections in this chapter include:
Checking the LEDs on an Autonomous Access Point/Bridge, page 4-2
•
Power Injector, page 4-5
•
•
Checking Power, page 4-6
Checking Basic Configuration Settings, page 4-6
•
Antenna Alignment, page 4-8
•
Resetting the Autonomous Access Point/Bridge to the Default Configuration, page 4-10
•
Reloading the Access Point/Bridge Image, page 4-11
•
Obtaining the Autonomous Access Point/Bridge Image File, page 4-13
•
•
Connecting to the Console Serial Port, page 4-14
Obtaining the TFTP Server Software, page 4-15
•
OL-5048-06
Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide
C H A P T E R
4
4-1