Table of Contents
Advertisement
TAS C
ONFIGURATION
This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at
www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The
screen shown below appears.
1
In the Timeout (sec) field, type the number of seconds for the NMP-500s to access TAS.
2
In the IP Address field is a valid DNS name automatically generated by TAS when connected
to a network but empty when used as a standalone.
3
If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click Save.
NOTE: FTP server is only for Network Displays with local storage.
ViewSonic NMP-500
15 of 38
Advertisement
Table of Contents
