Vnc Client - ViewSonic NMP-500 User Manual

VNC
CLIENT
The VNC client configuration screen shown below on the Management menu lets you set the
device to start as a VNC client and connect automatically to the VNC server specified. This auto-
start feature works only if the VNC client under System services is set to YES or Enabled.
VNC server password must be at least 6 characters (can be alpha-numeric).
X and Y coordinates let you set the size of the window of the remote desktop displayed if full
screen is not desired.
VNC full screen mode lets you set the client to start up as full screen all the time.
VNC auto restart mode reconnects the client in the event of network interruption.
Delay before restart VNC sets the time between reconnects.
ViewSonic NMP-500 13 of 38