Table of Contents
Advertisement
4
In the Browser Proxy IP field, type an IP address if the Browser Proxy was Enabled.
5
In the Browser Proxy PORT field, type the port if the Browser Proxy was Enabled.
6
In the Default transparency between OSD and video layer field, type a number that is
between 0 to 255: (128 is average where video and graphics blend together). Also, see
examples in the Transparency section of this guide.
• 0 = video only, no graphics
• 255 = graphics only, no video
7
In the Start screen display time field, type the number of milliseconds you want the initial
screen to be displayed at startup. (1 millisecond = 1/1000 second)
8
In the Screen Height field, type the height of the screen that is displaying your graphics
image.
9
In the Screen Width field, type the width of the screen that is displaying your graphics image.
10 If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click Save.
ViewSonic NMP-500
12 of 38
Advertisement
Table of Contents
