Table of Contents
Advertisement
MANAGEMENT
S
URL
TARTUP
The Network Configuration screen allows you to select the video that appears on-screen when you
boot up the NMP-500. To go to the Network Configuration screen after logging into the NMP-500,
select Management > Startup. The Startup URLs screen and the Network Configuration screen
appears as shown below.
Displays the IP address
Displays the Video source
Displays the Browser
1
To play a particular video at startup, in the Video field, enter a valid HTML page. Here are
some examples:
• http://<ip-address->/<mpeg-1/2-file-located on WEB Server>
• udp://<ip-multicast-address>/port
• rtp://<multicast-address>/port
• iptv://<ip-multicast-address>/videoport/audioport
• playlist=http://<ip-address>/<playlist-file-located-on-WEB-server>
2
In the Browser field, enter a startup web screen (for example, http://www.viewsonic.com).
Note: The MAC address is a read-only field that displays the built-in MAC address of the unit.
ViewSonic NMP-500
/N
S
ETWORK
C
ONFIGURATION
Continued . . .
10 of 38
Advertisement
Table of Contents
