Table of Contents
Advertisement
2.7. Content configuration – AppStart
User can assign the URL and App after system start up.
1.
Click on the Advanced button. The advanced configuration menu will be
launched. (Fig. 2.6.1)
2.
Click on Content, and then click AppStart.
3.
Enter the valid URL of HTML/SMIL in AppStart. (Fig. 2.7.1)
4.
Auto run can be disabled from here. Auto run will automatically be
enabled when content is played.
In most cases, the network needs to be re-configured on site, so this
prevents the device from starting playback automatically when powered
up for the first time on-site.
5.
The Advanced option is used for the 3rd-party App configurations only.
Trust: Switch to Enabled to set whether the content can access sensitive data:
such as intent extras, client credentials, access token..., etc.
Desktop mode: Switch to Enabled to force player to play content in Desktop
mode. Please note: not all the contents are created for Desktop mode, please
ask your content provider for details.
Ignore certificate errors: Switch to Enabled to ignore the certificate on HTML5
contents; if there is a certificate on HTML5 content, it will cause a playback error.
Reload when network is reconnected: Switch to Enabled to reload web page
as soon as network connection becomes available.
Trigger failover when network is disconnected: Switch to Enabled to load
failover content when network is disconnected.
(Fig. 2.7.1)
12
Advertisement
Table of Contents
