Table of Contents
Advertisement
ADMINISTRATION
A
V
DVANCED
To adjust the size and location of the video on the screen, click Administration > Advanced
video. The screen shown below appears.
1
In the X of destination window, type the center point of the screen on the X axis.
2
In the Y of destination window, type the center point of the screen on the Y axis.
3
In the Width of destination window, type the width of the destination window.
4
In the Height of destination window, type the height of the destination window.
5
If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click
Save.
ViewSonic NMP-500
C
IDEO
ONFIGURATION
23 of 38
Advertisement
Table of Contents
