Saving The Performance Report - KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual

To review the task schedule that you created using the Control Centre pro-
gram, enter the switch –ct in the Control Centre command line. The com-
plete list of created tasks with their descriptions will be displayed on your
screen. Every task in the list is assigned an ID. The ID's general format is
IdN, where N is the serial number of a task in the task schedule. These
numbers must be used when removing tasks from the schedule.
To delete a task,
enter the switch -cd=IdN (where IdN is the required task ID) in the Con-
trol Centre start up command line. For example: ./kavucc –cd=Id5
14.4.
report
Control Centre can save the performance report to the system log or a
separate file. You can define the reporting settings by using the following
switches in the Control Centre start up command line:
-w[t][a][-][+][=filename]
This switch logs the performance report into the defined file (the default
file is report.txt).
If the character a is defined in the switch, the report will be appended to
the contents of filename, the character t overwrites the report with a new
one. If the character + is defined, extra information will be included in
the report heading. The character – disables the extra information in
the report heading.
-ws[-]
This switch logs the performance report in the system log.
Saving the performance
C O N T R O L
233
C E N T R E