KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual page 114

-R sec
The required refresh rate of the Slogan real-time statistics screen. For
example, for the screen to be updated every thirty seconds you must
enter the command line switch -R 30. By default the screen is updated
every second.
-fast
This switch allows you to display only the end of the monitored log file.
If this switch is not used the screen will show real-time changes of the
log file contents with auto-scrolling to the point of change.
Since the total amount of changes within a log file can be sufficiently
large, it is advisable to use this switch.
-prev
This switch enables the program to study all the data presented in the
log file.
-r
This switch redisplays the log file, if it became unavailable at some point
of time.
The screen (see Figure 11) displayed by Slogan in the real-time monitoring
mode is divided into the following two panes:
•
General statistics displays the following total amounts:
•
•
•
•
•
•
•
•
•
Request—objects checked.
Archives—archives checked.
Packed—packed executable files checked.
Corrupted—corrupted objects detected.
OK—files checked.
I/O Errors—input/output errors occurred.
Infected—infected objects detected.
Disinfected—objects disinfected.
Suspicion—suspicious objects detected.
113
S L O G A N