To Check Or Not To Check - KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual

To create an address group, follow these steps:
1. On the group page (see subchapter 11.10.3.1), press the
add button.
2. Enter the group name in the Name text field of the Add
new group dialog box on your screen.
3. Press the add button. The group name will be added to the
group list.
4. Press the properties button.
5. Enter the mask (or the list of masks) for the From ad-
dresses to be checked for viruses by the Keeper program
in the Sender mask text field of the Group: group_name
dialog box on your screen.
6. Enter the mask (or the list of masks) of the To addresses to
be checked for viruses by the Keeper program in the Re-
cipient mask text field.
The masks must be entered in compliance with the POSIX regexp
standard.
If you do not define any value for the Recipient mask or the Sender
mask parameter, the program will use the mask. *@.* for it
If you define no value for both the Recipient mask and the Sender mask
parameters, no messages will be processed according to processing
rules of this group. You may do this to disable processing rules of the
address group without removing it from the group list. In any case you
will be able to enable the group rules by defining the required address
masks for this group.
7.6.2.3.
For every message sent by or delivered to users you may enable or disable
the message-processing mode. To do this:

To check or not to check...

87
K E E P E R