KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual page 188

The path to the AvpCtl file is defined by the switch –f, when you
launch the daemon process from the command line (see
subchapter 6.2).
•
Name or IP address of the corresponding server, if the
communication is to be performed via Inet connect.
3. In the Connect timeout text field, define the time (in seconds)
for the program to wait for an answer from the daemon proc-
ess.
4. In the Temp directory text field, define the full path to the di-
rectory for temporary files.
Make sure to include this directory in the location to be checked by
Daemon (see subchapter 11.7.2.2). Otherwise, the Keeper program
will not be able to detect viruses in mail messages.
To define mailers to be used by senders, recipients and admin-
istrators included in the address groups, follow these steps:
1. In the Sender mailer text field, enter the required mailer iden-
tifier for the senders. The identifier general format is:
protocol:host:port
where:
protocol is the optional protocol to be used by senders included in
the address groups (smtp or lmtp);
host is the name or the IP-address of the sender host, or the
name of the corresponding mail program;
The mail program name must be enclosed with parentheses and
may be followed by the optional command line switch.
port is the required port number (the default value is 25).
For example, the mailer identification string may look similar to
the following: smtp:localhost.tu:1100 or lmtp:(local.mail –l)
187
W E B T U N E R