KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI MAIL SERVER User Manual page 93

K E E P E R
To set the program to block all incoming infected messages,
follow the steps:
1. On the masks page (see subchapter 11.10.3.2), check the
group.
2. On the administrator page (see subchapter 11.10.3.4),
check the Isolator and the
the Infected object type and select Unchanged from the
corresponding Object action drop-down list.
3. On the report page, enable notification of the administra-
tors (for details refer to subchapter 11.10.6).
4. On the recipient page (see subchapter 11.10.3.6), check
the
and select Unchanged from the corresponding Object ac-
tion drop-down list.
7.6.2.4.3.
To set the program to deliver disinfected messages to the des-
tination mailboxes and to block messages that it failed to disin-
fect, follow these steps:
1. On the masks page check the
box for the selected group.
2. On the administrator page:
•
•
Check this group check box for the selected address
Block mail check box for the Infected object type
Delivering only disinfected messages
check the Isolator check box for the Infected object
type and select Unchanged from the corresponding
Object action drop-down list;
check the Add report check box for the Cured ob-
ject type and select Cured from the corresponding Ob-
ject action drop-down list.
Send notify check boxes for
Check this group check
92