Table of Contents
Advertisement
You can use the Configuration/Setup Utility program in your server to determine the
specific type of microprocessor that is in your server.
Racks are marked in vertical increments of 1.75 inches. Each increment is referred
to as a unit, or "U." A 1-U-high device is 1.75 inches tall.
Major components of the xSeries 365 server
The orange color on components and labels in the server identifies hot-swap or
hot-plug components. You can install or remove these components while the system
is running, provided that the system is configured to support hot-swap and hot-plug
components. For information about installing hot-swap and hot-plug components,
see Chapter 2, "Installing options," on page 7.
The blue color on components and labels indicates touch points, where a
component can be gripped, a latch moved, and so on.
The following illustration shows the major components of the xSeries 365 server.
Note: The illustrations in this document might differ slightly from your hardware.
5
Chapter 1. Introduction
Advertisement
Table of Contents
