Device and Help Menus
Selecting a Scanner
FilmGet FAU should be used with a Film Adapter Unit FAU-S10 option installed on a
CanoScan FB1200S scanner. If you are using more than one scanner, use the
following procedures to select the scanner.
WARNING
• The connected scanner is automatically selected when FilmGet
FAU is installed. Accordingly, you only need to use this
procedure when you are switching back and forth between
scanners or when you wish to confirm the name of the
selected scanner.
Click the [Device]
menu and select
[Select]
Checking a Scanner
This item runs a test to confirm whether the scanner and Film Adapter
Unit are operating correctly. Run the test if you suspect a malfunction
when you are operating the scanner and Film Adapter Unit.
Click the [Device]
menu and select
[Self Test]
Click the
arrow button to display the list of
scanners (usually only the connected scanner). Select
a scanner and click the [OK] button.
Click here to reject the setting
and close the dialog.
Click here if you wish to close the
dialog without running the test.
A message will display in the dialog
if a problem is detected.
Other Functions
Click here to
start the test.
FilmGet FAU User's Guide
91