Previewing - Canon CanoScan FB 1200S User Manual

Previewing

Once you have selected one or more frames and adjusted the trimming frames, the
next step is to preview the selected images.
Previewing
Click the Preview button to initiate a preview scan of each image in
succession. The images will appear one-by-one in the preview area.
The preview progress bar will
display. Click the [Cancel]
button if you wish to cancel
the command.
WARNING
• FilmGet FAU automatically calibrates itself and displays the
'Calibrating' message before it performs the preview all scan.
This process is to teach the correct white balance to the
scanner, which uses it as the registration color to correctly
scan all the other colors. Do not open the Film Adapter Unit
for any reason during this process.
• The scanner may take a few moments to respond to the
[Cancel] button when it is clicked during calibration.
• If the 'Insufficient free space on hard disk drive' message or a
similar message displays during the preview scan, it means that
your hard disk drive is too full to temporarily store the data for
the preview scan. Delete unnecessary files from the hard drive
to free sufficient space and reinitiate the preview scan.
• Adjustments, such as changing the image mode or brightness
• •
NOTE
(See p.
Please note, however, that the preview scan is only an
approximation of how the final scan will appear. The end
result may differ slightly.
67), are reflected immediately in the preview image.
Scanning
FilmGet FAU User's Guide
41