Canon CanoScan FB 1200S User Manual page 96

• A portion of the preview image is missing or a black border appears
around it
Cause:
Solution:
• Coloring of preview image is peculiar
Cause 1:
Solution:
Cause 2:
Solution 1: Adjust the coloring with the auto correction tool.
Solution 2: You can fix this problem to a certain degree with retouching
Cause 3:
Solution:
Cause 4:
Solution:
Cause 5:
Solution:
• Image scanned in black and white mode is too white or black
Cause:
Solution:
• Scanning is taking a long time
Cause:
Solution:
• Several options are grayed out and unavailable
Cause:
Solution:
96
FilmGet FAU User's Guide
Trimming frame is not correctly aligned over film
Adjust the trimming frame position and size so that it is correctly
aligned over the film.
Trimming frame is misaligned in the preview all window
Adjust the trimming frame position and size so that it is correctly
aligned over the film.
Film quality is poor or the film has faded
software. See the manual accompanying your retouching software.
Film type incorrectly set
Reset the film type. See p.
Film not suited to automatic exposure correction with the Auto Gain
setting
Turn off the [Auto Gain] setting in the [Settings] menu, set the
exposure manually and rescan.
Coloring and brightness settings are incorrect
Reset the image adjustment settings.
Threshold value is too high or low
Reset the threshold to a lower or higher value.
Input resolution is set too high
Lower the input resolution to the lowest appropriate setting and
rescan. See p. 50.
Many functions are not available until an image is previewed
Initiate the preview scan of an image.
See p. 39.
See p. 39.
33.
See p. 85.
See p.
See p.
See p. 45.
67.
See p. 83.
41.