Guide To The Scan Settings Section - Canon CanoScan FB 1200S User Manual

Image Width and Height
The image width and height settings determine the size at which an
image will be reproduced when it is output to a printer or shown on a
monitor.
The scan settings would require considerable forethought to set
correctly if you had to manually set the input resolution, output
resolution, and image width and height to achieve a particular result.
Fortunately, FilmGet FAU simplifies this process by providing five
preset modes that correspond to various uses of the image. It is
simple to fine-tune the settings merely by selecting one of these
modes and adjusting its preset values.

Guide to the Scan Settings Section

The scan settings section is used to adjust the scan settings. Switch
between modes by clicking one of the five buttons.
This is where the actual settings for
each mode are set and displayed.
Refer to the topics for each mode for
an explanation of the settings.
Scanning
Custom Mode. See p.
Select this mode when you wish
to scan with customized scan
settings that have been added
to the FilmGet FAU list.
File Mode. See p. 50.
Select this mode when you scan
an image for the purpose of
saving it to a file.
Text/Printer/Fax Mode.
54.
Select this mode when you scan
an image to paste it into a
document file, print it on a
printer or send it as a fax.
Photo Size Mode. See p.
Select this mode when you wish
to output the image at a typical
photo print size.
Add Button
Display Mode. See p.
Select this mode when you scan
an image to display it on a
monitor.
FilmGet FAU User's Guide
58.
See p.
57.
56.
47