Previewing All The Frames - Canon CanoScan FB 1200S User Manual

Previewing All the Frames

Once you have selected the film type and image mode, you should confirm the
position of the film frames on the scanner platen with the preview all function.
Click the [Preview All] button. The preview all window will display everything
detected on the scanner platen.
A preview scan progress bar
will display. Click the [Cancel]
button if you wish to cancel
the command.
When the preview all scan is complete, the preview all window will
show the position of the film and the trimming frames.
WARNING
• FilmGet FAU automatically calibrates itself and displays the
• The scanner may take a few moments to respond to the
• If the 'Insufficient free space on hard disk drive' message or a
• The images in the preview all scan cannot be saved or
• You can display the preview all window by clicking the [Show
• •
NOTE
36
FilmGet FAU User's Guide
'Calibrating' message before it performs the preview all scan.
This process is to teach the correct white balance to the
scanner, which uses it as the registration color to correctly
scan all the other colors. Do not open the Film Adapter Unit
for any reason during this process.
[Cancel] button when it is clicked during calibration.
similar message displays during the preview all scan, it means
that your hard disk drive is too full to store the data for the
preview scan. Delete unnecessary files from the hard drive to
free sufficient space and reinitiate the preview all scan.
adjusted.
Preview All Window] button at the top right of the main
window. Click the
the Macintosh version) of the preview all window to hide it
again.
Preview All Window
(showing 35 mm sleeve film)
(close box) at the top right (top left of