Positioning Film; Preparing The Film Adapter Unit - Canon CanoScan FB 1200S User Manual

Positioning Film

Preparing the Film Adapter Unit

Check the following points before you begin positioning the film on
the scanner platen.
• Are the scanner and Film Adapter Unit correctly connected?
• Are both the scanner and Film Adapter Unit plugged into electrical
• Were the scanner and Film Adapter Unit powered up before the
Positioning Film
Insert the film into a film guide and place it on the scanner platen as
shown below.
Calibration Strip
WARNING
• Place the film face down to obtain the correct orientation.
• Be sure not to obstruct the calibration slit when positioning
• Please refer to page 24 of the Getting Started for the proce-
32
FilmGet FAU User's Guide
outlets?
computer was turned on?
the film guide. Always align the alignment marks.
dures for placing the film in the film guides.
Align the
alignment mark on
the film guide with
the alignment
mark on the
positioning guide on
the scanner.